SGBH15型干式非晶合金变压器【价格批发公司】-北京澳门皇家堵场电气集团有限公司

SGBH15型干式非晶合金变压器

所属分类：非晶合金变压器
点击次数：
发布日期：2019/02/26
规格：
类型：
在线询价

详细介绍

产品概述 Overview

SGBH15型环保型H级绝缘非包封三相干式非晶合金变压器是SGB系列蕞新产品，铁芯采用了非晶合金新型导磁材料，替代原有的硅钢片，相比SGB10系列，空载损耗降低70%，节能效果更显著。同样具有安全、可靠、节能、防火、防爆、维护简单等优点。其设计更先进、结构更合理、外形更美观，主要性能指标均优于国内标准，如：局放水平、空载损耗、负载损耗、噪声以及能适应高湿度环境使用等，可安装在靠近湖、海、河边污秽潮湿的环境及防火要求高，负荷较大的地区，适用于高层建筑、机场、车站、码头、地铁、医院、电厂、冶金行业、购物中心、居民密集区以及石油化工、核电站、核潜艇等场所。

SGBH15 environmental protection type ? grade insulation non-encapsulated three-phase dry amorphous alloy transformer is the latest product of SGB series. The core adopts amorphous alloy new magnetic conductive material to replace the original silicon steel sheet. Compared with SGB10 series, no-load loss . Reduced by 70%, the energy saving effect is more remarkable. It is also safe, reliable, energy-saving, fireproof, explosion-proof, simple to maintain, etc. Its design is more advanced, the structure is more reasonable, the appearance is more beautiful, and the main performance indicators are better than domestic standards, such as: Level, no-load loss, load loss, noise, and adaptability to high-humidity environments, etc., can be installed in high-rise buildings in areas close to lakes, seas, rivers, polluted and humid environments, and where fire protection is high and loads are high. Airports, stations, terminals, subways, hospitals, power plants, metallurgical industries, shopping centers, residential areas and petrochemicals, nuclear power plants, nuclear submarines and other places.

产品展示 Display

有载调压变压器

型号含义 Meaning

产品特点 Characteristics

1、精心设计的线圈结构及真空浸渍处理工艺使SGBH15型非包封干式变压器无局部放电产生，并且在整个寿命期内，无任何龟裂现象，无绝缘水平下降现象。
2、高压采用连续式绕组、低压箔绕，整体真空浸渍及固化处理并采用高强度陶瓷支撑，有很好的突发短路电流的承受能力。
3、难燃、阻燃、无毒、自熄、防火。
4、在高温明火燃烧下，SGBH15型非包封干式变压器几乎无任何烟雾产生。
5、变压器为H级（180℃）绝缘。
6、绝缘层极薄且均匀。短时过负荷能力极强，无需强制冷却，可120%长期过负荷、140%过负荷3小时。由于这种绝缘材料不老化且有弹性，因此在±50℃条件下可立即加满载。

1. The well-designed coil structure and vacuum impregnation treatment process make the SGBH15 non-encapsulated dry-type transformer produce no partial discharge, and there is no cracking phenomenon and no insulation level drop throughout the life.

2. The high voltage adopts continuous winding, low-voltage foil winding, integral vacuum impregnation and solidification treatment and adopts high-strength ceramic support, which has good ability to withstand short-circuit current.

3. flame retardant, flame retardant, non-toxic, self-extinguishing, fire prevention.

4. Under the high temperature open flame combustion, the SGBH15 non-encapsulated dry type transformer has almost no smoke generated.

5. The transformer is H class (180 ° C) insulation.

6. The insulation layer is extremely thin and uniform. Short-time overload capacity, no need for forced cooling, 120% long-term overload, 140% overload for 3 hours. Since this insulating material is not aged and elastic, it can be fully loaded at ±50 °C.

产品用料 Materials

材料名称 Component	材质 Material	产地及质量特点 Place of origin and Characteristics

硅钢片 Silicon steel sheet	全新优质晶粒取向高导磁冷轧硅钢片 New high quality grain oriented high permeability magnetic cold rolled silicon steel sheet	产地：武钢或新日铁。激磁电流、铁损耗、饱和参数性能优越。冷轧硅钢带由于具有较高的导磁系数和较低的损耗，因此用来制作变压器具有体积小、重量轻、效率高的优势。热轧硅钢带则逊色于冷轧硅钢带，而二次片、拼接片等对变压器使用寿命危害就更不用说了。 Origin: WISCO or Nippon Steel. Excitation current, iron loss, and saturation parameters are superior. Cold-rolled silicon steel strips have the advantages of small size, light weight and high efficiency due to their high magnetic permeability and low loss. Hot-rolled silicon steel strips are inferior to cold-rolled silicon steel strips, and secondary sheets, splices, etc. are not harmful to the service life of transformers.
变压器绕组 Transformer winding	紫铜 Copper	产地：洛阳铜业。含铜量99.999%，国家规定：电工用铜纯度必须在99.5%以上的紫铜。黄铜可用在小功率非电力变压器上，且属于不合格违规使用。另用黄铜做变压器线圈会增加铜损（负载损耗），降低变压器使用功率等，是十分有害的。 Origin: Luoyang Copper. The copper content is 99.999%, and the state stipulates that the copper purity of the electrician must be 99.5% or more. Brass can be used on low-power non-power transformers and is a non-conforming violation. Another use of brass as a transformer coil will increase copper loss (load loss) and reduce the power used by the transformer. It is very harmful.
母排 Busbar
绝缘油 Insulating oil	环烷基矿物油 Cycloalkyl mineral oil	产地：新疆克拉玛依油田。清洁而透明的液体，不得有沉淀物、机械杂质悬浮物及棉絮状物质。劣质油或二次油存在加速变压器老化，噪音大、易短路烧毁，使用寿命短。 Origin: Xinjiang Karamay Oilfield. Clean and transparent liquids must be free of deposits, suspended solids of mechanical impurities and cotton-like materials. Inferior oil or secondary oil exists to accelerate the aging of the transformer, the noise is large, the short circuit is easy to burn, and the service life is short.
绝缘纸 Insulating paper	牛皮纸/NOMEX 绝缘纸 Kraft paper / NOMEX insulation paper	产地：许昌绝缘材料厂或美国杜邦公司。绝缘纸是变压器的重要组成部分，变压器老化、烧坏的主要原因之一是使用低价劣质绝缘纸，易发生电弧击穿，缩短了使用寿命。 Origin: Xuchang Insulation Material Factory or DuPont Company of the United States. Insulation paper is an important part of the transformer. One of the main reasons for the aging and burning of the transformer is the use of low-cost inferior insulating paper, which is prone to arc breakdown and shortens the service life.
环氧树脂 Epoxy resin	高环氧值(>40)6101环氧树脂 igh epoxy value (>40) 6101 epoxy resin	产地：瑞士汽巴嘉吉。F/H级蕞高耐温155℃/180℃。耐温、耐压、硬度、收缩率、吸水率、玻化温度、粘接强度、拉伸强度等技术指标对干式变压器绝缘、浇注质量非常关键。 Origin: Swiss Ciba Cargill. The F/H grade has a maximum temperature resistance of 155 ° C / 180 ° C. Technical indexes such as temperature resistance, pressure resistance, hardness, shrinkage, water absorption, glass transition temperature, bonding strength and tensile strength are critical to the insulation and casting quality of dry-type transformers.
电工木 Electrician wood	榉树木 Eucalyptus	产地：东南亚、内蒙古，由南方机车厂、内蒙古阿里河电厂提供，绝缘能力强，抗张强度高。 Origin: Southeast Asia, Inner Mongolia, provided by Southern Locomotive Works and Inner Mongolia Alihe Power Plant, with strong insulation and high tensile strength.

执行标准 Standard

1、GB1094.11-2007 干式电力变压器
2、GB/T10228-2008 干式电力变压器技术参数和要求
3、GB1094.10-2003 电力变压器第3部分：绝缘水平、绝缘试验和外绝缘空气间隙
4、JB/T10008-2004 6~500KV级变压器声级
5、JB/T56009-1998 干式电力变压器产品质量分等

1. GB1094.11-2007 dry power transformer

2. GB/T10228-2008 dry power transformer technical parameters and requirements

3. GB1094.10-2003 Power transformers - Part 3: Insulation level, insulation test and external insulation air gap

4. JB/T10008-2004 6~500KV class transformer sound level

5. JB/T56009-1998 dry power transformer product quality grading

技术参数 Parameters

变压器型号 Transformer Type	电压组合 Voltage Combination			联结组别 Connection Group	短路阻抗 Short- circuit Impedance	损耗(W) Loss		空载电流 No-load current （%）	产品报价 Quotation
变压器型号 Transformer Type	高压 HV	分接范围 Tap Range	低压 LV	联结组别 Connection Group	短路阻抗 Short- circuit Impedance	空载 No-load Loss	负载 Load Loss	空载电流 No-load current （%）	产品报价 Quotation
SGBH15-30/10-0.4	11 10.5 10 6.3 6	±5% 或 ±2×2.5%	0.4 0.69	Yyn0 或 Dyn11	4%	153	710	2.4	获取产品价格 Get Price
SGBH15-50/10-0.4						218	1000	2.4	获取产品价格 Get Price
SGBH15-63/10-0.4						279	1220	2.1	获取产品价格 Get Price
SGBH15-80/10-0.4						300	1380	1.8	获取产品价格 Get Price
SGBH15-100/10-0.4						324	1570	1.8	获取产品价格 Get Price
SGBH15-125/10-0.4						380	1850	1.6	获取产品价格 Get Price
SGBH15-160/10-0.4						437	2130	1.6	获取产品价格 Get Price
SGBH15-200/10-0.4						502	2530	1.4	获取产品价格 Get Price
SGBH15-250/10-0.4						583	2760	1.4	获取产品价格 Get Price
SGBH15-315/10-0.4						712	3470	1.2	获取产品价格 Get Price
SGBH15-400/10-0.4						793	3990	1.2	获取产品价格 Get Price
SGBH15-500/10-0.4						940	4880	1.2	获取产品价格 Get Price
SGBH15-630/10-0.4					6%	1085	5880	1.0	获取产品价格 Get Price
SGBH15-800/10-0.4						1231	6960	1.0	获取产品价格 Get Price
SGBH15-1000/10-0.4						1433	8130	1.0	获取产品价格 Get Price
SGBH15-1250/10-0.4						1692	9690	1.0	获取产品价格 Get Price
SGBH15-1600/10-0.4						1984	11730	1.0	获取产品价格 Get Price
SGBH15-2000/10-0.4						2470	14450	0.8	获取产品价格 Get Price
SGBH15-2500/10-0.4						2916	17170	0.8	获取产品价格 Get Price
注：以上参数仅供参考，具体以实际为准。我公司不断对产品进行优化设计，如有改动，恕不另行通知，解释权归澳门皇家赌场所有！ Note: The above parameters are for reference only, which is subject to actual conditions. Our company continuously optimizes the design of the products, and if there are any changes without prior notice, the right of interpretation belongs to Beijing Henganyuan Electrical Equipment Co., Ltd.!

安装尺寸 Size

变压器型号 Transformer Type	外形尺寸(mm) Dimensions	安装轨距(mm) Installation Gauge	重量(Kg) Weight

SGBH15-30/10-0.4	645460660	400*400	265
SGBH15-50/10-0.4	690460710	400*400	300
SGBH15-63/10-0.4	810460790	500*400	395
SGBH15-80/10-0.4	830460880	500*400	485
SGBH15-100/10-0.4	910800925	550*740	575
SGBH15-125/10-0.4	910800955	550*740	620
SGBH15-160/10-0.4	9108001000	550*740	650
SGBH15-200/10-0.4	9409001090	550*820	900
SGBH15-250/10-0.4	9809001160	550*820	1020
SGBH15-315/10-0.4	10209001235	550*820	1280
SGBH15-400/10-0.4	10309001260	550*820	1450
SGBH15-500/10-0.4	11408901315	660*820	1560
SGBH15-630/10-0.4	12108901250	660*820	1650
SGBH15-800/10-0.4	13508901350	820*820	1970
SGBH15-1000/10-0.4	13808901350	820*820	2170
SGBH15-1250/10-0.4	14258901430	820*820	2750
SGBH15-1600/10-0.4	142011001680	820*1020	3200
SGBH15-2000/10-0.4	154012001735	1070*1120	3710
SGBH15-2500/10-0.4	155012001905	1070*1120	4460
注：以上参数仅供参考，具体以实际为准。我公司不断对产品进行优化设计，如有改动，恕不另行通知，解释权归澳门皇家赌场所有！ Note: The above parameters are for reference only, which is subject to actual conditions. Our company continuously optimizes the design of the products, and if there are any changes without prior notice, the right of interpretation belongs to Beijing Henganyuan Electrical Equipment Co., Ltd.!

订货须知 Order

1、产品型号
　　2、额定容量(kVA)，三绕组变压器高、中、低压绕组容量比(％)
　　3、高压额定电压(kV)，调压方式，级数及分接电压百分比(％)
　　4、中压额定电压(kV)，调压方式，级数及分接电压百分比(％)
　　5、低压额定电压(kV)
　　6、短路阻抗(％)
　　7、联结组标号
　　8、冷却方式
　　9、特殊要求：如环境温度、海拔高度、相数、频率、有载分接开关、绝缘水平、环境要求。

1. product model

2.rated capacity (kVA), three-winding transformer high, medium and low voltage winding capacity ratio (%)

3. high voltage rated voltage (kV), voltage regulation mode, number of stages and tap voltage percentage (%)

4.the medium voltage rated voltage (kV), voltage regulation mode, the number of stages and the percentage of tapping voltage (%)

5. low voltage rated voltage (kV)

6.short circuit impedance (%)

7. the junction group label

8. cooling method

9.special requirements: such as ambient temperature, altitude, phase number, frequency, on-load tap-changer, insulation level, environmental requirements.